Model                                                  BY814x8/4-IIz
Norminal Gross Pressure                     4000KN
Direction of feeding plate                     Horizontal
Opening                                               1600mm
Dimension of working bench                 2700x1380mm
Diameter of cylinders                             320mm (Made in Wuxi )
Number of Cylinders                               2Pcs
Side helpful cylinders                            60mm x 2Pcs
pressurization                                       equal or less than 25Mpa
Stroke of cylinders                                 1000mm
Position of cylinders                               UPSIDE
Pressure of unit plate blank                  12kgf/cm2
Dimension of the board                         2560x1280mm
Allowed pressure                                  Equal or less than 25Mpa
Net weight                                            17000kgs
Control method                                      Automatic pump station
Thickness of upper and lower crossbeams  900mm
Thickness of active crossbeam                    400mm
Thickness of steel plate                               35mm
Chain and roller transports device               YES

All kinds of Size,pressure cold presses can be optioned,400T,500T,600T,800T and so on. Pre-press is also called cold press which is used in prepress process of plywood,blockboard production.There are two working ways,one thetop- cylinder,one is downside-cylinder.These two working ways can be optioned by customer.Strong body structure,and enough thickness steel plate,good quality cylinders,the top hydraulic unit system.We can manufacture all kinds of size and pressure as customer requires.

Jason Qiao Manager newtianlimachine02[at]126[dot]com