Production Description 

YGM High Pressure Suspension Mill can be grinding quartz, feldspar, calcite, talc, barite, fluorite, rare earths, marble, ceramic, aluminum bauxite, manganese ore, iron ore, copper ore, phosphate rock, red iron oxide, zircon sand, slag, cement clinker, activated carbon, dolomite, granite, iron oxide yellow, chemical fertilizer , bituminous coal,  lignite, porcelain clay,  fluorspar, bentonite, pyrophyllite, shale, purple stone, muddy green rock, Diego rock, gypsum, graphite, silicon carbide, materials in the 9.3 Mohs hardness below 6% moisture in a variety of non-explosive mineral materials processing. It features with unique pressure device design of star rack, thus the production increases by 30%-80%, higher grinding force, finer grain size, wider range of applications, overlapping multistage sealing, good dedusting effect, easy-to adjust classifier, wear-resistant parts, long replacement cycle of internal roller and ring.

Advantages and Features:
1.Compared with other mills under the same power output increased 20-30%, YGM High Pressure Mill grinding roller pressure on the material under the action of the spring in the high-pressure increase 800 - 1200kg.
2.YGM High Pressure Mill on the Mohs hardness of less than 9.3 processing of mineral materials can be crushed.
3.YGM High Pressure Mill wide range of product particle size, particle size up to 0.613 mm the thickest (30 mesh) particle size of generally up to 0.033 mm (425 mesh), few materials can reach 0.013 mm the smallest (1,000 head).
4. YGM High Pressure Mill dust effect is entirely up to the national dust discharge standard.
5. YGM High Pressure Mill analyzer easy to adjust.
6. YGM High Pressure Mill grinding device of overlapping muti-stage seal, seal.

Working Principle  

YGM series of high-pressure grinding machines, hanger fastening a roller l 000 l 500 kg pressure of a high pressure spring. Begin work, around the spindle roller and centrifugal forces at high pressure for the spring and Sichuan, the close ring rolling mill, the rolling pressure under dynamic conditions than the same Raymond Mill is 20%, the yield greatly improved.
When grinding the material into the grinding chamber, by the shovel blade into the ground between the roller and grinding ring rolling, rolling after the powder with the circulating air blower into the analysis machine, with the gas passing into the cyclone powder powder device is finished, large particles behind the re-grinding grain. Circulating air blower to repeat the above process to return, I will enter the bag filter air purification.