The fluid end assembly mainly consists of fluid end, valve assembly, liner and pistons. Fluid end is made of forged alloy steel and three fluid ends of each pump are interchangeable. The suction valve and discharge valve of F series mud pump are interchangeable. Liner use Bi metal, the sleeve is made of wear resisting cast iron, piston and piston rod are of slide fit and sealed with rubber seal rings and are fastened with lock nuts to prevent the piston from loosing.

The valve seat bores have bottom shoulders. The piston and liners are spray lubricated and cooled which allow an extender service life

  F1000 mud pump are rated at longer stroke length and relatively low stroke per minute. It can increase the service life of expendable parts of fluid end assembly. The power end assembly mainly consists of frame, crankshaft, and pinion shaft, crosshead and extension rod.

The fluid end assembly mainly consists of fluid end, valve assembly, liner and pistons. Fluid end is made of forged alloy steel and three fluid ends of each pump are interchangeable. The suction valve and discharge valve of F series mud pump are interchangeable. Liner use Bi metal, the sleeve is made of wear resisting cast iron, piston and piston rod are of slide fit and sealed with rubber seal rings and are fastened with lock nuts to prevent the piston from loosing.

The valve seat bores have bottom shoulders. The piston and liners are spray lubricated and cooled which allow an extender service life

 F1000 mud pump are rated at longer stroke length and relatively low stroke per minute. It can increase the service life of expendable parts of fluid end assembly. The power end assembly mainly consists of frame, crankshaft, and pinion shaft, crosshead and extension rod.

The series pump is producted strictly according to API Spec 7K"the Equipment Specification of Well Drilling and Repairing" ,and performed the EX-Work test under the specification thereof.

Emsco F-1000 triplex mud pump Technical Specification:

Model:F-1000     

Type:Rated Triplex Single action piston

Stroke:140 r/min 

Input Power:746kw    

Type Gear:Herring bone

Gear Ratio:4.206:1

Diameter of suction pipe:305mm

Diameter of Discharge Pipe:126.5mm, 5000psi

Pinion Gear size:196.8mm

Keys:50.75×50.75mm

Valve Ports:Valve over valve API#6 

Weight:18780kg 

Lubrication: Pressure &Splash 

If you need any items, kindly let us know, we will give you a satisfied quotation.

Miss Aily Ai

International Sales Consultant

Jinan Tianwei Innovation Oilfield Equipment Enterprise (OEE)

Jinding International Trade Development Ltd. (ITD)

Skype: oee-Aily

MSN: oee-aily(at)hotmail.com

E-mail: oee.twcxoil (at) china-ck.com twcxoil(at)china-ck.com

Website: www.china-ck.com

Add: No.13 shunshi Road, Jinan Shandong, China. Post Code: 250002

TEL: 86-0531-67811566  

FAX: 86-0531-67811577