1, environmental protection type lamps: the traditional fluorescent lamp contains large amounts of mercury vapor, if broken will evaporate into the atmosphere, causing environmental pollution, LED lamp is lead-free environmentally friendly products.

2, less heat: traditional lamps will produce a lot of heat, and LED lamp converts thermal energy into light energy, will not cause energy waste.

3, no noise LED lamps use without rectifier does not produce noise, suitable for the use of sophisticated electronic equipment, office and other places where the library.

4, no stroboscopic: traditional light sentence using alternating current, each second can produce 120-100 defective flash, LED lamp is the DC to DC, no flicker, protect the eyes.

5, no trouble of insects: LED will not produce ultraviolet light, so not many mosquitoes around the light source side, make the environment more clean, avoid mosquito transmitted diseases

6, a wide range of voltages, the traditional fluorescent lamp is lit by the release of high voltage rectifier, when the voltage is decreased, and the LED lamp can not light, in a certain range can be light, but also can adjust the brightness of light.

7, LED fluorescent lamp color selection range is wide, the 3000~8000K can be arbitrary choice.

8, LED fluorescent lamp, LED lamp is fast response, DC power it does not need to wait for the starting time instant bright.

9, long service life: LED fluorescent lamp life of up to 50000 hours, 10 times the service life of the lamp tube is traditional, long-term use does not need to be replaced, in case of damage can also repair, reduce labor costs, more applicable to replace the occasion, the traditional fluorescent lamp damage can not be reused, and the starter is easy to bad, need often change, does not apply to replace the occasion.

10, solid and reliable: LED lamp body of the students is the use of PC optical plastic pipe as the tube, good toughness, solid and reliable, is not easy to damage, but also the use of renewable, even if it is not easily damaged, and the traditional tube for glass products are fragile, not renewable utilization.

11, LED fluorescent lamp with 7W, 9W, 18W and other specifications, special specifications can be produced according to customer requirements.

Installation: LED daylight lamp bracket (with the traditional fluorescent lamp is similar, without rectifier can reduce the cost, in order to reduce the cost of consumer. Can not buy support, installation of the original fluorescent lamp will be replaced by a LED fluorescent lamp can be removed starter.