With an annual output of 50000 cubic equipment aerated concrete production line process

Small aerated concrete production line

The annual output of 50000 cubic aerated concrete production line mainly has: Material handling equipment, batching and pouring equipment, cutting equipment consists of steam curing. Device configuration is simple, the operation is simple and convenient, the investment is small wait for a characteristic. The device uses the air cutting technology, the distributed cutting machine, cutting process ( flip, slitting, die ) respectively in different work completed, and cutting, walking control in the same device, so that the work can be simplified, easy to operate and maintain.

Aerated concrete block production process

Aerated concrete equipment based on the raw materials category, quality, main process characteristics, adopt the different production process. But in general, the fly ash or sand adding water into a slurry, adding proper amount of powdered lime, cement, gypsum and a foaming agent, stirring after injection into the mold frame, static oxygen blowing after curing, cutting into a variety of specifications block or plate, by steam curing car into the autoclave in high temperature saturated steam curing condition, in the that the formation of porous light aerated concrete products.

Aerated concrete equipment production line of

According to the raw material category, quality, main process characteristics, adopt the different production process. But in general, sand aerated concrete is the river sand, lime, gypsum and cement as main raw material, foaming agent, stirring after injection into the mold frame, static oxygen blowing after curing, cutting into a variety of specifications block or plate, by steam curing car into the autoclave in high temperature saturated steam curing condition, in the form porous light sand aerated concrete products.

Small investment and annual output of 20000 party equipment aerated concrete production line process

The annual output of 50000 cubic aerated concrete equipment configuration table

A raw material treatment equipment.

1 ball mill 1 φ 1.2× 4.5m

2 jaw crusher 1 PE250 x 400

3 bucket elevator 2 HL200

4 belt conveyor 1 SJ500 x 7

5 electromagnetic vibration feeder 1 XZGI

6 screw conveyor 1 LSJ300 x 4m

Two. A pouring station equipment

1 aluminum mixer 1 LJB

2 eddy current pulping machine 1 JZW

3 mobile mixing pouring machine 1 JJB3.5

4 slurry pump of 1 50LXLZJ-40-25

5 steam curing car 20 ZYC3.9

6 die frame of 10 MK4

7 mold plate 40 MD4

8 supporting rods 100 root

Three cutting steamed section equipment.

1 double synchronous driving 1 5T

2 single hook Road 1 5T

3 planetary hoist 1 3T

4 automatic tension hook spreader 1 JD

5 common hanger 1 PTD

6 lifting machine 1 TSJ500

7 cutting machine 1 JQF4 x 1.2 x 7.5

8 autoclave 3 φ 2× 21m

9 boiler of 1 DZL4-1.25

10 lifting machine 1 TSJ500

11 column supporting rod 50 root

12.50 LXLZJ-40-25 12 slurry pump