Detailed introduction to THERMAL CTP PLATE:

Panda Thermal 830 CTP, the advanced thermal CTP plate with great compatibility is specially designed for making plates in various platesetters, suitable for newspaper and commercial printing. Together with the great compatibilities, there are friendly plate-making, faster adaptations and more chemical alternatives. It will truly save your operation time as well as your plate cost.

Artyong Thermal 830 CTP, it needs less adjustment than the other thermal CTP plates that you are using now. By checking few factors and adjusting the linearity, you can use the Panda Thermal 830 CTP with your existing systems freely. If you are tired of dealing with the sole supplier on pricing, service or stock issues, or you are not satisfied of being constrained by the vendors bundling strategy, why don't you just replace them by an advanced new plate?  Panda Thermal 830 CTP will not only bring you freedom but also push you to move forward faster than ever.

Panda Thermal 830 CTP, the new technology applied to the Panda Thermal 830 CTP will generate the fine resolution as well as the good reproduction through various plate-setters. Moreover, the great cost-saving by using Artyong Thermal 830 CTP will advance you more room to compete against other competitors in both quality and pricing. You will enjoy the new experience...Gain More, Pay Less!

ALUMINUM

Thickness:0.15 , 0.20 , 0.25 , 0.30 , 0.40 (mm)( 0.20 & 0.40 only for quantity orders)

EXPOSURE

Light Source:  Infrared Diode Laser

Exposure energy:  100 ~ 120( mj/c )

Dot reproductive range:  1~99 ( % ) ( at 450lpi )

Wavelength peak output:  800~850 ( nm ) (Peak : 830m)

PROCESSING

Developer:  PD-2

Replenisher:  PD-2R

Processing temperature:  24± 1 (C)        

Processing time:  30 (secs)

Replenishment Rate:  90 ( ml/m^2)

Working environment:  Daylight

PRESS ROOM

Run length (Normal status)                   Baking Condition

Unbaked:  150000 impressions 

Baked:  above 1000000 impressions

Static:  5  minutes at 240(C)