The main parameters of the engine |
Brand |
DCEC Cummins |
Model |
KTA38-G2 |
Spare power |
731KW/913.75KVA |
Type |
four strokes, waste gas turbine boost, direct spurting type |
Cooling way |
water cooling |
With type |
Inline type |
Bore*Trip |
159mm*159mm |
Cylinder |
12 cylinders |
Displacement |
37.8L |
Lubricating Capacity |
50L |
Speed adjustment way |
electronic speed |
Rotating speed |
1500r/min |
Starting way |
starting with electricity |
The main parameters of the generator |
Brand |
Stamford |
Model |
LVI 634B |
Type |
brushless (AVR automatic voltage regulating) |
The connecting way of the phase |
three phases four lines |
Insulation degree |
H degree |
TIF |
< 50 |
THF |
< 2% |
The factor of rated power |
≤ ± 1% |
Grading Protection |
IP23 |
Unit parameters |
Power |
600kw/750KVA |
Rated voltage |
400V/230V |
Rated current |
1080A |
Rated frequency |
50 HZ |
The factor of rated power |
0.8 |
The regulating rate of instantaneous voltage |
≤ -15%/ +20%
|
The regulating rate of steady voltage |
≤ ± 1% |
The time of steady voltage |
≤ 3sec |
The waving rate of voltage |
≤ 0.5% |
Voltage waveform distortion degree |
≤ 8% |
The regulating rate of steady frequency |
≤ 5%
|
The regulating rate of instantaneous frequency |
≤ -10%/+12% |
The time of steady frequency |
3sec |
The waving rate of frequency |
≤ 1.5% |
The waste of fuel with full load |
206g/kw. h |
Size(mm) |
4300*1700*2450 |
Weight(kg) |
7500 |
|
4. Specification of control Panel(with KAIXUN LCD controller) |
The control panel is Ordinary integrative type control panel, with the display of voltage, current, frequency, water temperature, oil pressure. The genset with low oil pressure, high water temperature, over speed, over load protection function. |
The features of KAIXUN LCD controller: |
KAIXUN LCD controller adopts high performance computer chip, can modify control procedure and protection parameters of generator, which incorporating measure, control, protection and three remote functions and so on, can fully satisfactory different kinds of Genset auto control requirements for generator user and or special assembly factory. |
The controller measure and display all output digital parameters for generator, and rpm, oil pressure, water temperature, DC voltage and runtime for engine. And the voltage and current use real virtual value measure to make sure the data more exacter. |
• Chinese/English menu for your choice, large LCD display. |
• Can select kinds of preset PT-sensor, and can custom parameter by corresponding software. |
• Keys on control panel are used for selecting control mode, startup running procedure, data display and modify the protection parameter. LED indicator is used for indicating the controller running mode and Genset running status, and LCD display measuring parameter and status. |
• Can select RS485 or RS232 communication port, realizing long distance monitor, and or fully realizing remote signaling, telemetering and remote control functions by communication with PC, can read and setting controller running parameter. |
• The controller is assembled by high strength plasticized panel and powdered steel shell, all connection are connected by pin-like and locked up terminal, more easier and convenient to connect, move, maintain and replace.
|