Briquette machine for turning biomass waste into biofuel

Material :

Almost all type of AgroForestry waste can be used, including: wood chips, maize stalks, soybean stalks, broomcorn stalks, cotton stalks, rape stalks, peanut plants, sunflower stalks, bamboo saw dust, bagasse agro-forestry wastes, such as sawdust, wood chips, branches, crop stalks, sugarcane residue, coffee husk, paddy straw, sunflower stalk, cotton stalks, bamboo dust, palm husk, soybeans husk, tea waste, etc.

Finished product:

After the processing of drying, compressing under the high pressure and temperature, the biomass briquette is characterized by high density, small in size, better combustion, capable as the substitute for the superior coal or firewood. This bio-fuel briquette is 45-80mm in diameter, occurs in the hollow quadrangular or hexagonal cylinder with a 15-20mm hole through the body. 

 Working Principle of Sawdust Briquette Machine:

 Sawdust Briquette machine uses a large screw to grind, compress and extrude the biomass into briquettes. The natural lignin content in biomass is liberated with wood fiber under high pressure and temperature.In the briquetting process lignin serves as the glue and combines the particles of wood together,thus binding, compressing the biomass to form into various moulds of high density briquette, such as hexagonal,quadrangular, square,etc. As your requirement, we can also change the shape to order. And the diameter of briquettes are from 50-80 mm. Moreover non-binder needs to be used during this process.

 The process for producing charcoal briquette as follow:

 
1. Crush the raw material into small pieces (diameter is about 3-5mm)
2. Dry the material by machine or dried it in the sun , till the moisture is less than 12%
3. Put the material into feed let of briquette machine
4. Produce the briquette stick from biomass material without any additive
4. Carbonized the briquette stick

 Advantages of biomass briquettes:
♦ Increase the net calorific value per unit volume after biomass briquetting
♦ Easy to transport and store as densified product
♦ Better solution to the problem of residue disposal
♦Uniform in size and quality as a kind of biofuel briquette
♦ Reduce excess deforestation by providing a substitute for fuel wood    

Features of GCBC Series Briquetting Machine:

• Long Life of Screw Shaft
  The shaft of this portable briquette machine is made from high hardness alloy steel. Manufactured with a milling machine, the distance and angle of every screw on the shaft is guaranteed to be the same.
• Long Life of Inner Former
  It is a kind of heavy duty briquette maker machine. Made from a whole steel bar, the lifespan of the inner former can be as long as two years. Based on water jet cutting system, the inner face is smooth, so that the surface of final products produced by this sawdust briquetting machine is smooth.
• Heating section – This briquetting machine is equipped with two heat collars which are made from thick copper wires and are ceramic inside.
• There is a movable plate on the bottom of the forming hopper, so that you can discharge the inputted material when it is jammed. Moreover, this design also makes it easier to clean this portable briquette machine.
• Lubricating System
  The gear bow is designed with a lubricating system to oil the gear box properly. Besides, this portable briquetting machine has an exhaust function to maintain consistent air pressure.
• Auto Cutting System
  The cutting system of this portable briquette machine consists of two steel plates. The sawdust briquettes can be automatically cut in uniformed lengths.