Solar Vacuum Tube Manufacturer (Three-target tube)

Solar Vacuum Tube Manufacturer (Three-target tube)
Model:OS-SG
Brand:Solar Vacuum Tube,Ousikai,OEM
Origin:Made In China
Category:Consumer Electronics & Lighting / Water Heater
Label:Solar Vacuum T , Vacuum tube , Evacuated solar tube
Price: US $1.95 / pc
Min. Order:10 pc
Inquire Now

Product Description

 OUSIKAI is the Toppest solar vacuum tube Manufacturer.

          We use four seasons constant  temperature coating technology, To minimize  the           color difference.

It has 15years long life span ,and the vacuum tubes can work individually,

so if the only one of them can't work,it won't influence on the others.

The spare parts can be changed freely .it is suitable for the many resident

buildings.

 

Solar vacuum tube working principle:

1,The high quality vacuum tubes ansorb the solar ultraviolet ray;then heat the
cold water in the vacuum tube
2,The hot water rise in the top of the water tank ,and the cold water sink to
bottom,then heat by solar collector.so the whole system is always circulating
continuously.
3,The electromagnetism or ball valve can perform the water supply automatically,the
water in the tank is not sufficient ,the electromagnetism valve will open its valve,
the tap water flow in the tank ,if the water is full,it will close the valve automatically


Solar vacuum tube features:

1. High heat effectiveness: higher than all glass evacuated solar collector tube by 15%
2. heat pipes conduction: successfully prevents the defects of tube breakage and low power output caused by water fouling and deposits or dust and sand
3. Prevents the tube from being easily broken caused by volume expansion when water freezes in the frigid season
4. Low thermal capacity makes the tube start up quickly
5. Energy output within only 2 minutes of sunshine
6. Insulation temperature can reach 260degree, average heat efficiency can still be more than 50%; even under -50degree

Haining Ousikai Industry & Trade Co.,Ltd
OS-SG series Single target coating solar vacuum              tube                                      Three target coating solar vacuum tube
Tube structure All-glass double-tube co-axial structure
Glass material Borosilicate 3.3glass
Outer tube diameter and glass thickness Φ=47±0.7mm &=1.6mm ±0.15mm
Φ=58±0.7mm &=1.6mm ±0.15mm
Φ=70±0.7mm &=2.0mm ±0.15mm
Inter tube diameter and glass thickness Φ=37±0.7mm &=1.6mm ±0.15mm
Φ=47±0.7mm &=1.6mm ±0.15mm
Φ=58±0.7mm &=1.6mm ±0.15mm
Absorptive coating propertyproperty Structure Glass/AL/AL-ALN(H)/AL-ALN(L)/ALN        Cu-SS-ALN
Sediment method 1 target magnetron sputtering 3 Targets magnetron sputtering
Absorption ratio α=0.90~0.92(AM1.5) α=0.93~0.96(AM1.5)
Emission ratio ε=0.09~0.1(80°C±5°C) ε=0.05~0.075(80°C±5°C)
Vacuum tightness 5.0×10-3 Pa
Heat loss 0.6-0.76W/(m2.°C) 0.4 -0.6W/(m2.°C)
Resist cold -20°C -25°C
Resist high temperature 220°C 250°C
Service life 12 Years 15 Years
Solar Vacuum Tube Manufacturer (Three-target tube) 1Solar Vacuum Tube Manufacturer (Three-target tube) 2Solar Vacuum Tube Manufacturer (Three-target tube) 3Solar Vacuum Tube Manufacturer (Three-target tube) 4Solar Vacuum Tube Manufacturer (Three-target tube) 5

Member Information

Haining Ousikai Industry&Trade Co., Ltd.
Country/Region:Zhe Jiang - China
Business Nature:Manufacturer
Phone:18657399020
Contact:Jason Chen (Sales manager)
Last Online:09 May, 2013