«Epsilon» fuel level sensor is designed for precision (with accuracy <1%) measuring of the fuel level in reservoirs and vehicle fuel tanks.

The sensor can be used in fuel economy control systems (control of fuel discharges and of fuel ups) and in satellite vehicle monitoring systems (GPS/GLONASS) of different manufacturers which have digital inputs RS-232, RS-485, frequency or analog input. The principle of the fuel level sensor «Epsilon» measuring is capacitive. There are two kinds of «Epsilon» sensors: ES2 provides data exchange through the RS-232 interface, and ES4 through the RS-485 interface. The additional device digital to analog converter EG4x (DAC EG4x) provide analog signal generation.

 

Main advantages of the sensor «Epsilon»:

v  Higher precision measurement of fuel due to: high-resolution of the sensor, linearity, temperature stability;

v  Explosion proof.  Sensor has all required explosion proof certificates;

v  Modular construction.  Measuring head is mounted and dismantled independently of the fuel probe, which allows easily and quickly to change, if necessary, the measuring head without re-calibration of the tank;

v  Wide range of possible probe length. The sensor with the length 75cm can be cut down up to 3cm. Non-standard length up to 3m;

v  Ease of installation. Only a small tube cutter needed to cut the probe. No need to sink the probe into the tank before the calibration;

v  Light weight (300g).