The initial adhesion tester is designed and manufactured according to GB4852 regulations, apply for related products to contact adhesive tape initial adhesion test, is mainly composed of an inclined plate, put the ball device, bracket, an adjustable horizontal base and steel.

Design standards: GB/T 4852

Method of operation:

The initial adhesion tester uses inclined ball method, through the ball and pressure-sensitive adhesive tape sticky surface between the specimen to pressure brief contact, tape adhesion test specimens of steel balls to tack. Specific operation method is to stick up, placed 30 degrees tilt test plate, take the ball the ball from the maximum number, in order to free the record up to 5 seconds, can stick the ball in the specimen.

Main technical parameters:

Model name

PT-502 initial adhesion tester

Ball

Bearing steel

Tilt angle

20-60 ° (adjustable)

Ball size

Inclined plate

Runway

The length of 100mm

Appearance size

(L*W*H) 380*150*250mm

Weight

12kg

Note: the above initial adhesion tester parameters for the standard model, if there are special requirements, we can according to your request to design the most suitable solutions!

Service commitment: initial adhesion tester from the date a year free warranty service, life-long maintenance. Technical personnel to the customer on site training, not regular plant maintenance.