Product name:  Hot Melt Glue for abs Plastic (Glue Particle)

 

 

Model	YX-004
Attachable materials	paper,plastic,metal,leather, wood working..
Color	Light yellow
Method:	Spraying coating,Spot coating
Operating temperature	150°C-180°C
Packing	25kg/box; 20kg/box

 

Having passed ROSH and 18 terms of environmental tests including REACH and PASH, etc. it’s completely environmental protection.

 

Instruction:

 

1. Recommended method: spraying coating

2. Recommended operating temperature: 150°C-180°C
3. You can consult to the manufacturer if carbonized in adhesive boxes or tubes.  Or you can clean it by mineral oil below temperature 120°C.
4. Via adjusting the temperature to adjust adhesive density when coating.
5. Don’t use it mixly together with other brand adhesive.
6. To avoid to be contaminted , you must close the cover immediately after adding hot melt adhesive to the tank.
 

Safety Precautions:

 

1. Workers should wear safety glasses and heat-resistant gloves when thermal operation like adding hot melt adhesive to the tank.
2. This product’s operating temperature must be below 200°C at any time.
3. The use of premises should be well-ventilated and banned all open flames.

Storage:

 

Store in a cool, dry environment and away from direct sunlight. Storage temperature should be below 35 ° C and far away from fire and heat source.

 

Guarantee period:

 

In the storage conditions described above, the hot melt adhesive can be stored for 12 months.

Packing: 

 

25kg/box; 20kg/box

 

Note:

 

The proper use of hot melt adhesive involves a number of technical details, and its application object multifarious. So a preliminary test or trial use it is s ested if the materials to be adhered or the working condition changes, so as to ensure the applicability if products.

 

Contact us: