Model: HT6510F
Durometer Type F is an exclusive design for testing soft cellular materials. The large diameter presser foot and cylindrical indentor configuration allow measurement by direct application to the test specimen.
 
 
SPECIFICATIONS
Display：4 digits, 10 mm LCD
Range：0~100
Resolution：  0.1
   Presser foot: 80mm diameter
 Indenter: Extension 2.54mm
                   25.2mm Cylinder
 Spring force: 455gf
Measurement deviation: ≤ ±1
        Power supply: 4x1.5v AA (UM-3) battery
        Operating condition: Temp. 0~50℃
                                           Humidity <80%      
        Size：162x65x28mm (6.4x2.6x1.1inch)
        Weight：about  490g
                               （not including batteries）
          PC interface: RS232C interface
        Power off :  2 modes
               Manual off at any time by depressing the power key till OFF shows on the display or Auto power off after 2 minutes from last key operation .     
        Accessories：
      Carrying case  1 pc.
       Operation manual   1 pc