Standards Complied:
Our technicials/equipment are trained to manufacture belts as per: DIN22102(German), AS1333(Australian), SABS(South African), RMA(US, South America), BS490(British), JS(Japanese).
Cover Selection:
General Light Duty Service:
Common References: DIN-Z
Very economical for moderately abrasive/small size material.
Medium Abrasion Resistance:
Common Reference: DIN-Y, N, RMA2, BS-N17, AS-N, JIS-G
Recommended for moderate abrasion resistance application, mosetly above ground. Regularly used for transportation of Coal, crushed ores, limestone, bauxite, sand. Cement etc^
High Abrasion Resistance:
Common Reference: DIN-X, M, RMA 1, BS-M24, AS-M, JIS-S
Excellent abrasion resistance against cutting, douding, heavy impact, during transportation of heavy rocks, sharp stones and highly abrasive materials.
Super Abrasion Resistance:
Common Reference: DIN-W
Recommended in extremely abrasive applications such as Copper &gold ore, sinter, coke, it provides high resistance without increasing cover thickness and weight of the belt.
Cover Grade |
Code |
Tensile Strength |
Elongation |
Abrasion |
Change rate of tensile strength &elongation after aging |
|
|
≥Mpa |
≥% |
≤ mm3 |
% |
Strong crack-type |
H |
24 |
450 |
70 |
-25--+25 |
Strong wear-type |
D |
18 |
450 |
90 |
-25--+25 |
General type |
L |
15 |
450 |
120 |
-25--+25 |