stepper motor driver

stepper motor driver
Model:JK1545
Brand:JK
Origin:Made In China
Category:Electronics & Electricity / Magnetic Materials
Label:driver , stepper motor , M542
Price: US $28 / pc
Min. Order:1 pc

Product Description

 

Characteristics:                                                                   

1.DC power input type:24V~50VDC
2.Output current:1.3A-4.5A
3.Mircostepping:1(1.8º)、1/2、1/4、1/8、1/16、1/32、1/64、1/128、1/256
               1/5、1/10、1/25、1/50、1/125、1/250
4.Protect form : Overheated  protect, lock automatic half current ,error connect protect
5.Dimensions:118mm×76mm×33mm
6.Weight:<300g.                                         
7.Working environment:Temperature-15~40℃ Humidity<90%。

I/O Ports:                                                                                   

1、           VCC+:DC power positive pole
Note:Must guard against exceeding 50V,
so as not to damage the module
2、GND:DC power cathode
3、A+、A-:Stepping motor one winding
4、B+、B-:Stepping motor other winding
5、PUL+、PUL -:Stepping pulse input+5V (Rising edge effective ,         rising edge duration >10μS)
6、DIR +、DIR-:Stepping motor direction input, voltage level touched off,high towards, low reverse
7、ENA+、ENA-: motor free          
NOTE:                                                                                                                                    
1, When ambient temperature is high or working current over 2.7A,  fix the module on big metal shell , or use axle flows fan dispels the heat, to make the module run reliably for a long time.
 2,  Half current automatically: if control machine not send out signal  in half second, driver enter half current state of automatically for electricity saving, the phase current of the winding of the electric
3, The fault phase is protected : When the double-phase electrical machinery is connected with driver , users are apt to connect the phase by mistake, thus would damage the driver seriously. The protecting circuit is within this driver, when users connect by mistake, the driver will not be damaged, but the electrical machinery runs abnormally, shake , and output is small.Please check whether the wiring of electrical machinery is a mistake
Switch Choice: (“ON=0,OFF=1”)                                                      
1、Microstepping choice:
SW5
0
0
0
0
0
0
0
0
1
1
1
1
1
1
SW6
0
1
0
1
0
1
0
1
0
1
0
1
0
1
SW7
0
0
1
1
0
0
1
1
0
0
1
1
0
0
SW8
0
0
0
0
1
1
1
1
0
0
0
0
1
1
Micro
1/2
1/4
1/8
1/16
1/32
1/64
1/128
1/256
1/5
1/10
1/25
1/50
1/125
1/250
 
2、Current choice
SW1
0
1
0
1
0
1
0
1
SW2
0
0
1
1
0
0
1
1
SW3
0
0
0
0
1
1
1
1
Current(A)
1.3
1.8
2.3
2.7
3.2
3.7
4.2
4.5
 
 
 
 
3、Full current or half current choiceSW4:0=Full current;1=half current
4、Pulse choiceIn the driver has a jump

5、installation dimension (mm)
Payment Terms:TT
stepper motor driver  1

Member Information

Changzhou Suncor Motor Co., Ltd
Country/Region:Jiang Su - China
Business Nature:Manufacturer
Phone:13584328731
Contact:Mr sun (general manager)
Last Online:14 Apr, 2015