Color proofing sealant (filler)
Characteristic.
1, this product has good adhesion and penetration control flexibility, make decorative panel waterproof overall improvement, suitable for ceramic tile, stone and other decorative materials filling.
2, color diversity makes veneer decoration effect more perfect.
3, waterproof mouldproof function, make facing health, clean.
4, can reduce the slurry, hanging tears the phenomenon such as pollution finishes.
Surface treatment:
1, the gap should be clean, no debris and water for ceramic tile, high water absorption, can be wet gap.
2, to ensure that the tile adhesive completely dried (about 24 hours), shall be the joint.
Color: can be customized according to customer demand
Method of use:
Slot 1, clean sealing, which no dust, debris and water.
2, the gap depth shall be not less than 0.6 cm or bricks.
A large aperture 3, porous ceramic tile, should first make facing protection after filling, so as not to affect or pollution brick surface, or pointing knife special for filling.
4, the color waterproof mildew sealant at 3.3 ~ 3.5:1 (powder: water) mix stir into the particle-free paste, after standing for 3 to 5 minutes and then stirred for 1 to 2 minutes to use.
5, use the rubber filling knife or soft scraper, the mix the good color waterproof mildew sealant along the diagonal direction of the tile surface is pressed into the crevices, fill the gap, and the redundant part of the blow, the construction time is 1 ~ 2 hours.
6, let it dry naturally, depending on weather and about 2 to 6 hours, with a slightly damp sponge or cloth to clean the surface of the ceramic tile.
7, the sealant at 24 hours after complete curing, water or special cleaning agent for the remaining spot.
Matters needing attention:
1, color waterproof mildew powder, water ratio of the sealant, as the brick joint drying degree of width and slightly different environment, the gap is narrow can be relatively a little thin, brick seam width should be 1.5 ~ 5 mm (the use of coarse sand grout, brick seam width of 2 ~ 13 mm).
2, can not use acidic cleaner clean sealing ceramic tile.
3, not in 5 ~ 40. C and rain under construction.
4, to the expansion joint should adopt the neutral sizing and other special sealant.
5, construction as far as possible not to have sealant thick residue in the face of brick, lest after bonding is difficult to clean.
6, 24 hours of pressurized caulking avoided tiles and grout, scratching and rain.
7, black sealant after construction, should as soon as possible (within 10 minutes) with a dry cloth to clean the surface. After 24 hours of dried, to wash the remaining spot, lest produce white sealant.
8, large area construction, should keep the expansion joint, construction after 5 ~ 6 hours maintenance required 1 times, 24 hours after the maintenance second.
Dosage calculation:
(length + width brick brick) / (long X wide brick brick) X joint X deep slit width X1.7= kg / m2 (calculated in millimeters)
Brick size width of crack depth dose per square meters
95 mm x 95 mm and 3 mm, 5 mm and 0.58 kg
60 mm x 240 mm and 5 mm, 5 mm and 1.15 kg
200 mm x 300 mm and 5 mm, 5 mm and 0.3 kg
400 mm x 400 mm and 5 mm, 7 mm and 0.32 kg
600 mm x 600 mm and 5 mm, 7 mm and 0.21 kg
Storage: store in a cool and dry place, unopened product can be stored for 18 months.
Packaging: 2 kg and 20 kg / bag / box