| Model |
TY-600-G |
|
| Normal AC Output Power |
540W |
| Maximum AC Output Power |
600W |
| AC Output Voltage Range |
190V ~ 260V /Switch is at 230V Position |
| 90V ~ 130V /Switch is at 115V Position |
| AC Output Frequency Range |
46Hz ~ 65Hz |
| Total Harmonic Distortion (THD) |
< 5% |
| Power Factor |
0.99 |
|
| DC Input Voltage Range ( Optional ) |
10.8V ~ 30V / 22V~60V |
Introduction |
| Peak Inverter Efficiency |
92% |
The small type solar grid tie power inverter can obtain the solar energy from solar panel, and can tie to the grid through its output cable with no extra equipment. The installation is very convenient and reliable. |
| Standby Power consumption |
<0.5W |
| Output Current Waveform |
Pure Sine-wave |
| MPPT Function |
Yes |
| Over Current Protection |
Yes |
|
| Over Temperature Protection |
Yes |
Operation Procedure |
| Reverse Polarity Protection |
Yes |
1. Connect the Solar Panel ’s DC supply cables to the DC input terminal of the inverter, be sure that the polarity is correct.The range of output power of Solar Panel is 20W~600W.
|
| Anti-Island Protection |
Yes |
| Stackable |
Yes |
| Operating Temperature Range |
-10 0C ~ 45 0C |
2. Put the AC output voltage switch on the inverter to the correct position (115V or 230V) according to your location home grid AC voltage. |
| Inner Box Dimension |
335 * 270 * 140 mm |
| Inner Box Gross weight |
3.6 kg |
3.Connect the supplied AC power cord to the inverter and plug it to a home wall socket. |
| Package |
2 pcs / Carton |
| Carton Dimension |
345 * 280 * 300 mm |
4. If there is no AC grid detected, the red LED will be on, the inverter will not put out power, this is called “Island Protection”. |
| Carton Gross weight |
8 kg |
