Features:

Control range: 50~100 meters 

Material:Aluminum+Glass cover
Water proof: IP68 
Dia: 178 mm 
Height: 114 mm 
Weight: 0.75 Kg 
Voltage: AC 12V  DC 24V
Color: Cool White, Warm White, Yellow, Blue, Green, Red, RGB
RGB synchrony (Inner Control + remote synchrony controller) 

Application:

It is used in swimming pools, fountains, scenic ponds’ illumination and decoration.

Installation procedure

1. Screw the bracket into the wall
2. Mount the clip of the bracket into the hole of the light
3. Screw the detailed illustrations in the below pictures      

Cautions

1. Work with AC12V, otherwise the light will be possibly damaged
2. This light should be installed not deeper than 50cm underwater
3. The power wire of the lights shall be joined with other power wire out of the water. Waterproof treatment should be done if the joint is in the water otherwise there is risk for water intrusion.    
4. The light should be in the water for the test of remote function or other functions, and don’t test it more than 3 minutes out of the water otherwise the light will be possibly damaged or caused disfunction . If the user is not available to test it in the water, then please shut off the light every 3 minutes to be cold for the new test