Surface must be clean and sound. It may be dry or damp, but free of standing water. 

Pre-mix each component. Proportion 5part Component A to 1 part Component B into a clean pail.

Mix thoroughly for 3 minutes with a paddle on low - speed (400-600 rpm) drill until uniformly blended. Mix only quantity that can be used within its pot life.

The crack can be injected with high pressure grouting pumpS812.

Maximum crack  width  5.0 mm.

Minimum age of concrete must be 28 days prior to application

Wear protective clothing , goggles, gloves and or barrier cream. In case of contact with skin, wash plenty of water immediately and consult a physician.

Property		Value
Appearance		Yellowish
Mix Density g/CM3		1.025
Viscosity mpa.s		30
Pot life  h		2-3
Compressive strength   MPA		≥55
Tensile strength        MPA		≥28
Bonding Strength	Dry concrete    MPA	≥ 3.5
	Damp concrete MPA	≥ 2.4

Shelf Life

2 years when unopened

A--component :5Kg or15kg

B--component:1Kg  or3kg

Dry, cool, shaded place

1. Avoid contact with skin and eyes

2. Wear protective gloves and eye protection during work

3. If skin contact occurs, wash skin thoroughly

4. If in eyes, hold eyes open, flood with warm water and seek medical attention without delay