waste to oil machine turn waste tyre plastic to fuel oil

waste to oil machine turn waste tyre plastic to fuel oil
Model:DY-1-10
Brand:DOING
Origin:Made In China
Category:Industrial Supplies / Environment Protection Facilities / Other Environment Protection Facilities
Label:waste tyre pyrolysis , waste management , waste to oil machine
Price: US $60000 / set
Min. Order:1 set
Inquire Now

Product Description

 Why this project is so popular and how to operate this machine?

Because it is  green technology (pyrolysis and distillation)  recycling waste to oil resourses.          

It is absolutely environmental friendly and create great profits for you. We have successfully installed more than 60 sets machine in different country, India, Iran, Pakistan, Poland, Macedonia, Romania, Turkey, AlbaniaMalaysia, Mexico etc. Any interests please feel to contact us.

 

What can you get from this machine?

Take one batch 10t waste tyre pyrolysis plant for example:

Total Output:

1. Crude oil: 45%*10t=4.5t

2. Carbon black: 35%*10t=3.5t

3. Steel wire: 13%*10t=1.3t

No.

Item

Cost of Per Batch

1

10 tons of waste tires

10T×USD 236/T=USD2360

2

0.4 tons of coal

0.4T×USD126 /T=USD50.4

3

Water and electricity

200×USD0.16=USD32

4

Workers Salary

4×USD16=USD64

5

Total Cost

USD2506.4

 

NO.

Item

Income

1

Crude Oil

10T×45%×USD709=USD3190.5

2

Carbon Black

10T×35%×USD82=USD287

3

Steel Wire

10T×13%×USD34=USD450

4

Gross Profit

USD3927.5

5

Daily Net Profit

USD3927.5-USD2506.4=USD1421.1

6

Monthly Net Profit

USD1421.1×25=USD35527.5

7

Yearly Net Profit

USD35527.5×10=USD 355275

 

 

How to operate this machine?

1)  feed the raw material into furnace automatically or manually, then seal the feed inlet system

 

2)  heat the reactor by burning the fuel material(coal,or wood,or natural gas ,oil ) in the combustion system 

 

the reactor will slowly become heat ,when the temperature reach around 250 degree celsius, the oil gas will be formed

 

3) After processed by our technology, the oil gas will go to cooling system for cold liquid oil

 

the gas which can not become liquid under normal pressure , will be desinged to go back to combustion system through safety device instead of the fuel material to burn the reactor, which is environmental friendly and can save you much energy

 

4)After finished oil produce ,the temperature of reactor will be down,while,carbon black can be discharged automatically

 

5) when the temperature fall down to 100 degree celsius,worker could opened the door of reactor to discharge of steel wire 

 

6) Then can start to another batch working

 

Advantages of waste tyre and plastic recycling machine

1. High oil output rate 45%--55%.

2. Rapid condensers and large cooling area89 square meters,assure u   get much more and higher quality oil.    

3. Double dust removing device,more environmental protection.

4. Double tail gas recovery,saving energy.

5. Q245R boiler steel plate, high temperature resistance, thickness reaches

14mm—18mm,guarantee 6—8 years service lives.

6. Auto feeder and carbon black elevator,high automation,saving time and labors.

 

Technical Detail

This is a batch process system.

The waste tyres are fed into the reactor vessel and heated under controlled conditions of temperature and pressure.

The process will bring about molecular restructuring of the rubber under the pyrolysis process as the result; furnace oil in gaseous form is produced along with other gases.

These vaporized gases are passed through heat exchanges, where in the furnace oil is condensed into liquid form.

During the process, carbon black and steel are also generated.

The heat exchanger uses coolant water, as a condensing medium and this water is re-circulated through process.

 

After-sales service

Installation and Training: We will send one technicians for each set of machine to your company within 10 days when the machine arrives to your factory. The technicians will be charge of guiding your installation, testing the machine and training your workers. The installation period shall be 30 days. You shall pay salary for the technician with 50USD per day and also the round-trip ticket and accommodation.

 

As we all know, this is a special field, high profit and high risk. So, when you choose a supplier, security will be the most important thing.Except security, technology, quality and oil refining experience are also very important. Since this is a new field, so, no exact rules. In this way, experices and technology will be the key point. As for the quality, it should be worth of your cost. 

 

waste to oil machine turn waste tyre plastic to fuel oil 1waste to oil machine turn waste tyre plastic to fuel oil 2waste to oil machine turn waste tyre plastic to fuel oil 3waste to oil machine turn waste tyre plastic to fuel oil 4waste to oil machine turn waste tyre plastic to fuel oil 5

Member Information

xinxiang city DONG Renewable Energy Equipment Co.,Ltd.
Country/Region:He Nan - China
Business Nature:Manufacturer
Phone:37186857
Contact:Bella NIu (manager)
Last Online:25 Apr, 2014