Introduction

Ethernet RFID Reader is based on TCP/IP, can read ID or IC  cards。This readers can easily connect to network(LAN,WAN,MAN).Installation is very easy. It meets the needs of M2M

According to the different card types can divided into three:
1)T001-ID: it can read the 125khz ID CARDS
2)T001-MF: it can read the 13.56Mhz IC card, such as MF card etc.
 

Features
10/100M Ethernet interface, Support MDI/MDIX
Support TCP Server, TCP Client, UDP Server, UDP Client and DHCP.
 Can transmission between different Gateways, Also can use in Internet.
Support command to drive the on-board buzzer
Real-time transmission
 Effective distance is larger than 5cm
5V DC supply, low power consumption less than 250MA.
Working temperature -20 to 75，Storage -40 to 85

Size:142*100*31MM

Material ：ABS

Interface

 This RJ45 integrated network filter and tow LED(one indicate the LINK status, another is rx/tx status. )