Product Brief Description: WD-C504M-BNC Video Cable Ethernet Bridge(master) with 4 interface can connect 4 Ethernet Bridges (Slave),like WD-C200M-BNC and transmit network by use of video cable as transmission medium to finish the update from the traditional analogue video monitoring camera to High definition digital IP camera monitoring system together with WD-C200M-BNC Video Cable Ethernet Bridge(slave)

As the development of high definition digital information age, the traditional analogue video monitoring camera will gradually be replaced by high definition(HD) digital IP camera., where be used such as bank, traffic, hospital, school security construction and so on.

Simple Installation

Steps: 1、The existing analog camera add a video server or change IP CAM instead of present analogue camera

2, Add 1 piece WD-C200M-BNC Video Cable Ethernet Bridge in the back of the end of IP CAM or video server.

3. And connect them by use of coaxial cable, then connect WD-C504M-BNC video cable Ethernet bridge (master) in the other end of coaxial cable.

4. When you update many analogue video cameras to high definition digital IP camera, steps are the same above. The other end of video cable connects the interface of video cable Ethernet Bridge (Master).

When you finished these steps, you also finish the update from traditional analogue video monitoring camera to high definition (HD) digital IP camera, which realize the signal of traditional analogue camera within 1000 meters by network.

Product Features: (1)Up to 250 effective data rate via WD-C504M-BNC Video Cable Ethernet Bridge

(2)The farthest distance transmission can reach 1000 meters Supply with 10/100Mbps Ethernet interface*1，Coaxial Port (F-Type 75Ω) Coaxial cable interface

(3)Support QAM 16/64/256/1024, DQPSK, DBPSK and ROBO modulation Integrated Quality of Service (QOS) Functions and Multicast and IGMP

(4)Peer to Peer Networking,

(5)128 bit AES Data Encryption Security Simple installation, plug and play

Product Specification: