Detail Information

Ⅰ. Introduction

 

GD-0711A Asphalt Mixture Theoretical Maximum Specific Gravity and Density Tester is designed and made by the stated requirement of the T071 “Theoretical Maximum Specific Gravity and Density of Asphalt Mixture Test (Vacuum Method)” in the Industry Standard of People Republic of China JTJ052 Specifications and Test Methods of Bitumen and Bituminous Mixtures for Highway Engineering.

 

The Asphalt Mixture Theoretical Maximum Specific Gravity and Density Tester  is suitable to determine theoretical maximum specific gravity and density of asphalt mixture using vacuum method. The determination is used to design the asphalt mixture ratio and calculate the percentage of void and the degree of compression for investigation of road situation or quality management of road surface construction. But it is not suitable to the water absorption rate of porous mineral aggregate asphalt mixture more than 3%.

 

 

Ⅱ.Technical specification and parameters

 

1.   Power supply: AC 220 V±10%, 50 Hz

2.   Container cubage: 4300 ml × 2

3.   Vacuum pump power: 160 W

4.   Pressure range: 0~730 mmHg

5.   Vibrator power: 30 W

6.   Dimension: 510 mm (length) × 520 mm (width) × 380 mm (height)

 

 

 

 

Ⅲ.Characteristic

 

1.Adapting microprocessor to control

2.vacuum degree and its keeping time ,vibrating time is displays by LED

3.There are two models of vibration,and may be switched each other ,two samples can be tested at the same time .

 

 

Any More Questions ,Pls Let Us Know at Any Time              Your Success is Our Business