1.   It is essential for this equipment that enhanced productivity, installation and quality improvement

2.   As the high efficiency vision camera is asked in order to investigate precisely and repair the error of device position which results from the modification and wear of tape feeder in the SMD device.

3.   The Feeder, which supplies resources in the SMT production line, should be under clear condition continuously because it has relatively close correlation with the quality of a current line, production efficiency and loss

l  Convenience in use

1.     The rectangular coordinate can get X-Y direction.

2.     Check for the existence, transformation, user in the feeder

3.     The installation is to quip it with actual device and consolidation in feeder base

4.     Lens` safe arrival part, CCD Camera, the precise micro controller of X, Y, Z axis

5.     The automatic (or semi-automatic), IC transfer device can move IC to the specific area (point)

6.     The simple calibration for removing or taking feeder easily

7.     It is correction as measurement with CCD Camera.

8.     Timer control makes it possible to change the IC pick-u time.

9.     The use pressure is able to control in the regulator and air cylinder.

10.   Both verification and correction are available for worker’s convenient and well carriage by the work desk.

l  Technical Data

1.     Overall size 500 x 350 x 550 mm, L x W x H

2.     Type Electric / Pneumatic

3.     Monitor: 12” LED display, with cross mark

4.     Camera: CCD, 50 times magnification

5.     Object of Feeder SM series