Description of liquid silicone RTV-2 for mold making

RTV2 Silicone Rubber is a kind of two-component material. The silicone rubber is made up of Part A base silicone and Part B curing agent. The Part A base silicone and Part B CA curing agent can cure at room temperature by a condensation reaction, after full cure, it become a cured silicone mold. The silicone mold can be cast the following materials for reproduction: plaster, polyurethane, PU, GRC, cement, resin, polyester, wax etc...

 

Characteristics of liquid silicone RTV-2 for mold making     

 

1. Good flow ability and long working time

 

2. Medium hardness

 

3. High tear and tensile strength

 

4. Easy de-mould from complex replica parts

 

5. Acid and alkali-resistance

 

6. Low linear shrinkage

Technical parameter of liquid silicone RTV-2 for mold making

Item	RTV 2030
Color	Liquid white
Curing agent	CA30
Mixing ratio	100:02:00
Mixed viscosity	24000~25000 cps
Working time	30-40 Minutes
Curing time	4-6 Hours
Hardness	28-30 Shore A
Tear Strength	30 N/mm
Tensile Strength	0.3 MPA
Relative density	1.10-1.15 g/cm3
Elongation at break	480%

 Applications of liquid silicone RTV-2 for mold making       

 

RTV2 Silicone rubber series are suited for reproduction of cement molding, concrete stones, artificial stones, plaster molding, figures, art objects, decoration molding, GRC products, gypsum products, resin products, PU molds. Etc.

 

RTV-920 silicone rubber is a kind of silicone which is especially suitable for the reproduction of artificial stone,cement stone,concrete stone and manufactured stone moldmaking.

   

 

 Storage of liquid silicone RTV-2 for mold making          

 

When the RTV2 Silicone Rubber is stored at or below 30 C (85F) in the original unopened containers, Silicone Base and CA30 Curing agent have a usable life of 12 months from the date of production.