DSG150 High-pressure hose crimping machine

Model:	DSG150
Brand:	Haori
Origin:	Made In China
Category:	Industrial Supplies / Rubber & Plastics Machine
Label:	hose crimping machin , rubber hose crimper
Price:	¥68000 / set
Min. Order:	1 set

Inquire Now

Product Description

1. The usage

The machine is an enhanced type of a high pressure locking tube machine in model 150, which is the special equipment for pressing the tube end of a high pressure rubber tube with a outer cover and a core together for the production or repair a hydraulic support.

2. Composition

The machine is composed of a locking & pressing mechanism, a motor, a gear pump, a control valve and an oil tank.

Parameters:

Maximum inside diameter of attaching rubber tube: 150mm

Maximum length of attaching bent: 265mm

Crimping force： 1130T

Power： 7.5KW

Voltage: 380V

The oil tank capacity： 100kg

The equipment size(L×W×H)： 2000×850×1500

The weight： 1500kg

Ⅱ. The work principle and the work procedure

A locking & pressing mechanism is a work one in the machine. The pressing cover realizes a reciprocation movement under the leading of the ram plunger, which press or slacken the spring presser fixed on the core shaft to push the tube end, the outer cover and the core into the center hole on the spring presser. Then start the motor, the oil pump, the control valve to drive the ram plunger movement. By means of the pressing cover with a taper inner wall, press tightly the outer wale of the spring presser with a same taper to realize the pressing purpose. After change the direction, the pressing cover moves back and the spring presser returns to the original position and you can take the high pressure rubber tube connection end out.