Our Mattress include Low air loss mattress,bubble mattress,tube mattress,mattress with CPR,PVC air mattress,Pump with Low noise.

Anti bedsore medical air Mattress specification:
1. Material: PVC 3PLY
2. Thickness:0.3mm-0.4mm
3. Size:200CM*90CM( inflated)
4. Number of interchangeable gasbag:20pcs

Pump Specification:
Voltage:  AC 220v/50Hz  110v/60Hz
Pressure range: 12~18kpa 
Air Output:8.0L/Min
Noise lent: Silent
Circle time: 5~6minutes
size:  250MM*140MM*104MM
Weight : 1.35kg                                    
Power cord length: 3.0m

Anti bedsore medical mattress with air pump

1. Medical Patient mattress (bed-ridden patient beds) mattress unpacking.
2. For patient lay on the mattress.
3. Fixed the mattress at the terminal under the bed, putting two strips (in the small PE package) with mats to prevent slipping.
4. Connect the air inlet onto the blue hoses.
5. Connect the other end of the hoses to air pump air outlet connector.
6. Plug the air pump and the power button on.
7. Pressure adjust according to the patient's weight.
8. When the patient on the bed during the hospital never turn off the appliance.
9. Make sure that Air inlet at the foot end of the patient places
10. The surface of mattress should be kept away from sharp weapon to avoid break the envelop.
11. Mattress clean with soapy cloth. Do not use cleaning agents mixed solvent.
12. Patient Maximum weight: 135KG