The unit comes with in-built 15 Amp transfer switch and a 30 Amp circuit breaker. Input battery cable lugs are provided and the AC output is obtained through hardwire connection.
Features include overload, short circuit, over-temperature, under & over voltage protections, and selectable. emergency home backup. Safe to use and features over-current, over- temperature and surge protection.
Simply connect the inverter to a battery and plug your AC devices into it, then you’ve got portable power.
*Smart rack tower design
*Dc 12v to Ac 220v/230v/240v
*Rated power 500w/600w/800w/1000w
*Frequency 50-60HZ
*Pure sine-wave output,can be used for different domestic appliance
*Microprocessor based design that Superior performance from CPU control technology
* AVR design can support stable voltage output
*Inner-equipped protection for over-load, shout-circuit, over-voltage, low- voltage and over-heating
*Heat-Sink built in internal and come with Auto temperature control fan for heat dissipation
* Easy to check with inverter status with LED indication that can be upgraded to LCD
* Generator compatibly and external battery connection achievable
* Built-in 8-20Ah charger support fast battery recharging
*Intelligent battery management with protection against over-charged and over-discharged etc.
*Reverse polarity protection/by fuse/diodes
Applications:
Pure sine wave output can be used with different domestic appliance
TV, refrigerator, fan, air conditioner induction cooker, micro-wave oven etc.
Specifications:
|
MODEL
|
SN SERIES
|
500W
|
600W
|
800W
|
1000W
|
|
INPUT
|
Phase
|
Single
|
|
Voltage
|
115VAC or 220/230/240VAC
|
|
Voltage Range
|
-35% ~ +25% for selected nominal voltage.
|
|
Frequency
|
50Hz / 60Hz (Auto Sensing)
|
|
Frequency Range
|
47Hz ~ 55Hz for 50Hz nominal;
56Hz ~ 65Hz for 60Hz nominal
|
|
OUTPUT
|
Phase
|
Single
|
|
Voltage(Btt. Mode)
|
115VAC or 230 VAC
|
|
Voltage Regulation(Batt. Mode)
|
±3%
|
|
Frequency
|
50Hz or 60Hz
|
|
Frequency Regulation (Batt. Mode)
|
+/-1 Hz
|
|
Output Waveform
|
Pure sine wave
|
|
BATTERY
|
Battery Type
|
Sealed ,maintenance-free lead acid
|
|
Back up Time
|
Depends on the external battery
|
|
Dc voltage
|
Dc 12v
|
|
Charging current
|
10A
|
|
TRANSFER TIME
|
Typical
|
4-6ms
|
|
INDICATOR
|
Led indicator lights
|
Normal (Green), Warning (Yellow), Fault (Red)
|
|
LCD Indicator with Blue /yellow Back Light
|
UPS status, I/P&O/P Voltage Frequency,
Load , Battery Voltage , Temperature, Model
|
|
AUDIBLE ALARM
|
Battery Mode
|
Beeping every 4 seconds
|
|
Low Battery
|
Sounding every second
|
|
Overload
|
Sounding every 0.5 second
|
|
Fault
|
Continuous sounding
|
|
PROTECTION
|
Full Protection
|
Discharge, overcharge, and overload protection
|
|
PHYSICAL
|
Dimension, DXWXH (mm)
|
375* 130*190 mm
|
|
Net Weight (kgs)
|
7.2
|
9.1
|
10.5
|
13.5
|
|
ENVIRONMENT
|
Operating Environment
|
0~40 Degrees Centigrade, 0~90% relative humidity
(non-condensing)
|
|
Noise Level
|
AC Mode: Less than 40dB
Backup Mode: Less than 45dB
|
Competitive Advantage:
1. Pure sine-wave output,can be used for different domestic appliance
2. Superior performance from CPU control technology
3. AVR design can support stable voltage output
4. Auto temperature control fan for heat dissipation
5. Easy to check with inverter status with LED indication that can be upgraded to LCD
6. Built-in 8-20Ah charger support fast battery recharging
