OBO surge protective product

Model:	LY1-D20
Brand:	LEEYEE
Origin:	Made In China
Category:	Electronics & Electricity / Power Supply & Distribution / Other Power Supply & Distribution
Label:	surge arrester , lightning protection
Price:	US $10.5 / pc
Min. Order:	50 pc

Inquire Now

Product Description

ITEM:LY1-D20 Surge Protective Device

LY1-D20 is suitable for TN-S/TN-C-S/TT/IT etc . power supply system of AC 50/60 Hz, ≤ 380V,installed on the joint of LPZ1 or LPZ2 and LPZ3,it's designed according with IEC61643-1/GB18802.1,it adopts 3.55mm standard rail,there is a failure release mounted on the module of surge protective device.When the SPD fails in breakdown for over-heat and over-current,the failure release will help electric device seperate from power system and give the indication signal,green means normal,red means abnormal,it's also could be replaced for the module when has operating voltage.

Products features

1.Could be replaced for the module not need power cut

2.Maximum current of endure the lighing stoke 10kA (8/20μs)

3.Time of response <25ns

4.The color of visible window shows operating status,green means normal,red means abnormal

Main technical parameters:

Techinical parameters	Model LY1-D20
Rated operating voltage Un(V~)		220V	380V
Maximum continuous operating voltage Uc		320V	385V
Voltage protection level up(V~) KV		≤1.2	≤1.5
Nominal discharge current In(8/20μs)KA		10
Maximum discharge current Imax(8/20μs)KA		20
Response times	<25
Test standard	GB18802.1 IEC61643-1
The cross section of L/N line	6
The cross section of PE line	16
Fuse of switch(A)	10A, 16A	16A,25A
Operating environment°C	-40°C~85°C
Relative humudity(25°C)	≤95%
Installation	Standard rail 35mm
Material of outer covering	Fiber glass reinforced plastic