LSM672N Load Sharing Module Diesel Generator Electronic Load Controller 

1)Description----

The function of the Load Sharing Module is to proportionally share load between two or more generator sets while the system frequency is held constant.As an accessory to the electronic Governing System,the PER 672 measures the true power current ,and throught a parallel cable interconnection,continuously controls the governor system.

2)Performance:

Load SharingAdjustable to within +/-2% between sets 
Performance.Isochronous and droop paralleling and power control 
Reverse Power Monitor.Adjustable from 0.5-20% with a 2 second inverse time constant 
Forward Power MonitorONtrip point adjustable from 20-100%                        
                                            OFFtrip point adjustable from 0-80%                   
                                               Normally open contacts with a 2 second inverse time constant

3)Power Output:

Signal.0 to 7.5 Volts DC representing 0-100% load 
All performance specifications are based on 5 amps from the current transformer(CT) Secondaries at full load unity P.F.

4)Power input :
AC input signals.. 208 or 416 volt nominal line to line and 5 amp CTs with a minimum 6.25 VA rating. Internal 0.25 ohm burden resistors 
Line to line voltagesper table below             
HZ      LOW RANGE       HIGH RANGE            
50      140-250 VAC         260-420 VAC             
60      170-260 VAC         340-500 VAC            
400     170-260 VAC         340-500 VAC

DC Supply..18-36 VDC(Transient and reverse voltage protected)
 DC Power Consumption.70 ma continuous

5)Weight: 2.41kg

6)Relative products:

PER672

PER6714