Reliable 100GHz Thermal AWGs are designed for use within the C-band release of DWDM system.To decrease the power dissipation of the devices in different environmental conditions,the AWG package is special designed with selection of reliable thermal plastic with low thermal conduction and the AWG operating temperature is controlled by using foil resist heater or Peltier TEC with thermistor temperature sensor.Different input and output fiber,such as SM fibers,MM fibers and PM fiber can be selected to meet different applications. The component is designed for minimun roll-off over the ±10pm clear bandwidth whilst not exceeding the maximum insertion loss of 6.0dB
Features
40Channels
Dense Channel Spacing of 100GHz
Flat-top Filter Shape
Internal Thermal Regulation
Low Insertion Loss&PDL
Low Power Consumption
Applications
Metro/Long Haul Networks
DWDM Networks
Optical Signal Processing
100GHz Thermal Arrayed Waveguide Grating Module
| Model: | RB-AWG-1 |
|---|---|
| Brand: | Reliable Photonics |
| Origin: | Made In China |
| Category: | Electronics & Electricity / Telecommunication & Broadcasting / Network Communications Equipment |
| Label: | AWG , AAWG , Fiber AWG |
| Price: |
US $10
/ pc
|
| Min. Order: | 1 pc |
Product Description
Parameters | Unit | 100GHz 40CH AWG Mux/Demux Module | 100GHz 40CH AWG Mux/Demux Module | |
Number of Channels | 40 | 40 | ||
Channel Spacing | Ghz | 100 | 100 | |
First Channel | Customer specified | Customer specified | ||
Packaging | Thermal(Internal Temperature Control Circuit) | Thermal(Internal Temperature Control Circuit) | ||
Central Wavelengths [λc] | C-Band | C-Band | ||
Channel Passband | 1dB | nm | 0.38 | 0.38 |
3dB | nm | 0.56 | 0.56 | |
Insertion Loss | dB | ≤5.5 | ≤6.0 | |
Insertion Loss Uniformity | dB | ≤1.0 | ≤1.5 | |
Passband Ripple | dB | ≤0.5 | ≤0.5 | |
Isolation | Adjacent Channel | dB | > 23 | > 23 |
Non-Adjacent Channel | dB | > 30 | > 30 | |
Total Isolation | dB | > 21 | > 21 | |
Polarization Dependent Loss | dB | < 0.8 | < 0.8 | |
Polarization Mode Dispersion | ps | < 0.8 | < 0.8 | |
Return Loss | dB | > 40 | > 40 | |
Directivity | dB | > 50 | > 50 | |
Operating Temperature | ℃ | -5 ~ +65 | -5 ~ +65 | |
Storage Temperature | ℃ | -40 ~ +85 | -40 ~ +85 | |
Package Dimension | mm | 150x65x16 or Customer specified | 150x65x17 or Customer specified | |
19'' Rack-mount | 1U/2U available | 1U/2U available | ||
Pigtail Length | mm | 100 or Customer specified | 100 or Customer specified | |
*All values specified are without connectors, connectors can supplied on request. *Fiber type G | ||||
Electrical Specifications:
Parameters | Notes | Specifications | Units | ||||||||||||||
Min | Typ | Max | |||||||||||||||
Set-Point temperature of component | Optimum operating temperature section for thermal AWG | 65 | | 90 | °C | ||||||||||||
The commands could only set current temperature and threshold in this range. | |||||||||||||||||
Set-Point temperature stability | Over entire operating temperature range for thermal AWG | | | ±0.2 | °C | ||||||||||||
Heater Drive Voltage | | | 5 | | V | ||||||||||||
Heater Drive Current | | | | 2.5 | A | ||||||||||||
Heater Power Dissipation(Maximum, stable) | | | | 12.5 | W | ||||||||||||
Heater Power Dissipation(stable state) | | | 6 | W | |||||||||||||
AWG Temperature Settling Time | AWG warm up time from a cold start( | | | 5 | min | ||||||||||||
AWG Temperature Settling Time | AWG warm up time from a cold start( | ||||||||||||||||
