Detailed Product Description

1)Rated Current :125A~250A 3P,4P
2)Fission type,wiring type,110/220/380/660VAC available
3)2 position( I - II )

Automatic Transfer Switch(ats) YES1-250C

1) Rated current : 160,200,250A
2) Pole number:  3p, 4p
3) Rated working voltage: AC 240V/415V(110,220,380,400,440,660VAC available), 50/60Hz
4)EMC /liife enduring/temperature rising /character and comprehensive testing equipments are configurated to guanrante the product quality. 
5)Connection type: Utility-Utility or Utility-Generator.
6)Small volume,the total height is only 110mm. 
7)The intelligent controller is splited and convenient for installation and operation. 
8)Serve district:hospital,shoping mall,bank,fire control,ppostal communication,urban rail transportion, high-rise buildings,industrial assembly line,television station,chemical industry,metallurge industry,military and so on places

 Application 

A transfer switch is a critical component of any emergency or standby power system. When the normal (preferred)  source of power is lost, a transfer switch quickly and safely shifts the load circuit from the normal source of power to the emergency (alternate) source of power. This permits critical loads to continue running with minimal or no outage. After the normal source of power has been restored, the re-transfer process returns the load circuit to the normal power source. it is mainly applied at the places like fire control,postal communication,hospital,hotel, urban rail transportation,high building,industrial assembly line, television station etc where power interruption is not permitted.

 Standards  

 it is in line with GB/T14048.11 superscript,and also with "high-rise buildings fire norms" and "Architectural Design firenorms","Emergency  Lighting Design Guide","Civil Electrical Design Specification".

 Parameters

 Function &Features of Configured Controller

1)with the fault check function of over voltage,under voltage,phase loss of two power; 
2)the starting signal of generator can be indicated; 
3)control program:break superior and close inferior is achieved by single chip; 
4)logical program ,electric double interlock; 
5)small volume, it is installed on the panel of the cabinet for observe and operate easily; 
6)with strong electromagnetic interference performance;