Installation and Use:§Use the mounting plate as a template to mark the position.
§Drill two small holes and insert plugs into the holes
§Fasten the mounting plate on the wall with the provided screws
§Slide the dispenser in the mounting plate
§Insert 4 pcs batteries into battery compartment with proper polarity
§Open the cover and fill in the liquid to container
§Put you hand under the sensor0-10cm,and let the dispenser to start working for continuously until liquid soap come out from nozzle.
Specification:
§Cuter size: L205*W140*H98MM
§Capacity: 500ml
§Drop volume: 0.8-1ml
§Weight: 532g
§Material: ABS, AS
§Battery: 4*1.5v “AA”
Technology Parameter:
§Electrical source voltage: DC6V
§Static current: 60UA
§Working current: 200MA
§Power: 4W
§Effect distance: 0-10CM