1. Introdution

Please contact me by  "vincent.tseng[at]hotmail[dot]com".

Water Jet Cutting Machine can pressurize water to a pressure 250~400 MPA and jet the water through a spray nozzle whose bore diameter is 0.15mm~0.35mm. The jetting speed can reach 800~1000 m/s, that is why it is called water jet. This machine can be used to cut many kinds of soft materials and if an appropriate amount of abrasive is added into the water, it can be applied in cutting more sofe or rigid materials. 

 

2. Features

1). It is cool cutting without any heat created.

2). No harzardous material created during processing.

3). Safe and fast.

4). Low cost.

5). It can be applied to many area such as ceramic tiles cutting, marble stone cutting, glassing cutting, etc.

 

3. Parameters

Model	Cantilever Type CNC Water Jet Cutting Machine ZAW420-X2030
Workable area	2.0 m x 3.0 m
Max. Pressure	420 MPA
Control of Axis	All by servo controlled
Speed of Axis	X axis = 0~15 M/min (600 ipm) Y axis = 0~15 M/min (600 ipm) Z axis = 0~1.5 M/min (60 ipm)
Precision of Axis	X,A axis ±0.05mm Y,Z,R axis  ±0.08mm ±0.025 mm per 300 mm
Re-position Precision	±0.05 mm
Max. Cuting Dispersion	±0.06 mm
Max. Processing Speed	15 M/min
Water-dust Proof System	All the motion parts are protected by water-dust proof system
Automatic Balance Adjustment	Available
Power-off Protection	Available
Residual Removal System	Optional
Automatic Lubrication	Available (controlled by CNC controller)
Abrasive Hopper	Amount Adjustable (controlled by CNC controller) -Patented
Pneumatic Straightening System	Available
Driving Mode of Each Axis	CNC drive by servo motor system and ball-screw, linear-guide wa in X, Y, Z axis.
High-pressure Piping	6.35m (diameter) x 9.0 m (length) 9.53m (diameter) x 1.6 m (length)

 

 

 

 

 

 

More Pictures of other types of Machines

 

Gantry Type CNC Water Jet: