Hunan Qianhao Electrical & Mechanical Technology Development Co., Ltd provides electro-permanent lifting magnet for steel plate, which is used for lifting monolayer sheet. Adopt modular unit structure with advantages of great magnetic force and light weight. It can achieve multiple lifting with beam, can lifting various sizes of steel plate.

It can be widely applied to:
Steel mills or dock, ports lifting steel plate;
Automatic cutting line;
Steel plate pretreatment line;
Shipyard, steel plants, large-scale machinery factory steel plate lifting.

Model	Rated lifting capacity (kg)	Thickness  (mm)	Max pull-off force (kg)	Overall Dimension (mm)						Weight (kg)
				A	B	H	R	d	E
QHEPM-1.0P50	1000	≥12	3600	464	184	180	32	100	425	65
QHEPM-1.5P50	1500	≥12	5400	464	254	180	32	100	425	85
QHEPM-2.0P50	2000	≥12	7200	604	254	180	32	100	535	105
QHEPM-3.0P50	3000	≥12	10800	674	324	220	40	130	635	145
QHEPM-1.0P70	1000	≥18	5200	404	224	180	32	100	490	68
QHEPM-1.5P70	1500	≥18	6500	494	224	180	32	100	570	90
QHEPM-2.0P70	2000	≥18	9100	674	224	180	32	100	570	115
QHEPM-3.0P70	3000	≥18	13000	494	404	220	40	130	590	150
QHEPM-5.0P70	5000	≥18	20800	754	404	220	40	130	690	245
QHEPM-6.0P70	6000	≥18	39000	944	404	280	42	150	690	290
QHEPM-8.0P70	8000	≥18	32500	944	494	280	42	150	690	355
QHEPM-10P70	10000	≥18	39000	1484	584	280	45	150	690	660
QHEPM-2.0P100	2000	≥25	7200	504	354	180	32	100	590	162
QHEPM-3.0P100	3000	≥25	9600	654	354	220	40	130	610	210
QHEPM-5.0P100	5000	≥25	18000	804	504	220	40	130	710	360
QHEPM-6.0P100	6000	≥25	21600	954	504	280	42	150	780	435
QHEPM-8.0P100	8000	≥25	28800	944	654	280	42	150	780	560
QHEPM-10P100	10000	≥25	33600	1104	654	280	45	150	780	790

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Notes:

1. Rated lifting capacity of this series is defined as follows: the pull-off force is 1.5 times the rated lifting capacity when average air gap is 1.5mm.

2. Thickness in the table means minimum thickness of the steel plate that can generate maximum magnetic power, not means can not lifting if less than this thickness, just means steel plate less than the thickness will occur the magnetic saturation, can not produce the maximum magnetic force.

3. This series also have several strong magnetic type, is working air gap designed as 2.2mm, but the length and width dimensions unchanged, its rated magnetic force on 1.5mm air gap is about 1.5 times compared with common type listed above. It is suitable for poor surface quality of steel, and paint film or other protective layer thick occasions.