Platinum cure silicone rubber is a kind of translucent liquid, generally named two components silicone rubber with mixing in 1:1. It’s mainly suitable for tire molds making.
Advantage of platinum cure silicone rubber for tire mold
1) Non- shrinkage
2) High tensile and tear strength with high copy times
3) Exceptional fluidity and good operability (mixing ratio at 1:1)
4) High temperature resistant in 250 Centigrade
Operation instruction ofplatinum cure silicone rubber for tire mold
Step One:Take 100g of part A and 100g of part B and mix in 1:1 and mix the two parts evenly.
Step Two:vacuum pumping
Without exception, this step takes less than 10 minutes.
Note: The time for vacuum-pumping should be less than 3—5 minutes, otherwise, once the silicone rubber has cross-link reaction during vacuum pumping process, it will not be operated.
Step Three: Pouring the mixture into the frame with original mold slowly.
Shelf life for silicon rubber for mold making
8~10months, when stored in a dry & cool place under the room temperature 25.
Packing for silicon rubber for mold making
20kg/drum for part A+ 20kg/drum for part B in one set
200 kg/drum for part A+ 200kg/drum for part B in one set
Any more information, please feel free to contact Ms Cecilia
Office No.: 086-0755-89948013
Mob: 86-18938867615
Skype: summertaoteng
Email: hyyi(at)szrl(dot)net