Pad Printing Silicon Rubber Usages:     

Pad printing silicone rubber is mainly use for printing irregular patterns on plastic toys, shampoo, pen, glass ,electroplating toys and trade makers and so on .

Pad Printing Silicon Rubber description

Pad printing silicone rubber as a carrier which transfer patterns on the steel plate to the toys products surface.

.

Pad Printing Silicon Rubber Features:

1)     High print times

2)     abrasion resistance. 

3)     Good printing effects

4)     Permanent and durable

Pad Printing Silicon Rubber Operation Instructions: 
. Step One: Take 100g of part A and add 2g of part B and mix the silicone rubber and curing agent evenly.

Step Two: vacuum pumping

Without exception, this step takes less than 10 minutes.

Note: The time for vacuum-pumping should be less than 3—5 minutes ,otherwise, once the silicone rubber has cross-link reaction during vacuum pumping process, it will not be operated.

Step Three: Pouring the vacuumed mixture into the original mold slowly,

Shelf life for silicon rubber for mold making

8~10months, when stored in a dry & cool place under the room temperature 25.

Packing for silicon rubber for mold making

20kgs/drum vacuumed packing

For more information , pls feel free to contact Ms harry

office no. :   0086-755-89948013

Mob:    +8618938861896

Skype:     smilingharry

Email :   hyst(at)szrl(dot)net 

Welcome to our website www dot szrl dot net