Features:  The product adopts special high-polymer resin that can form a special flexible and protective coating, which enables the product to reach an obvious effect of anti-rust, anti-erosion from rainfall, stone impact resistance, sound insulation and leakage blocking.

To reach basic anti-rust effect, use 4-6 cans (1kg/can) of the product for one vehicle; to reach super sound-proof effect, use 10-12 cans (1kg/can) of the product.

Usage:

1. Lift the vehicle up by hand to remove tyre and plastic fender;

2. Use high pressure water gun to completely clean chassis or compartment and other parts to be coated to be free from rust, dust, oil and wax trace;

3. After cleaning, use high-pressure jet gun to completely dry the water mark;

4. Use waste newspaper to closely cover the parts not to be sprayed, including exhaust pipe, body, engine, water tank, spring, air conditioning condenser and vertical identification number etc.

5. Completely shake up the product, and then open the false-proof cover, insert special spray gun, connect 0.60-0.80MPA compressed air, and then evenly spray the product on the target surface back and forth at a distance about 25-50CM from the surface.

6. Do not spray the product on the heat dissipation and generation areas;

Notice: 

1. The product is inflammable. Do not use it in a place near to open fire or with high temperature. Do not impale or burn the can body;

2. The product should be used in an environment with good ventilation. In case of difficulty in breathing, immediately leave the operation area and breathe fresh air;

3. Avoid contact with eyes, skin, clothes and other parts. In case of contact, use a huge amount of clean water to rinse;

4. Keep it away from children. Ingestion is prohibited. In case of ingestion, please see a nearby doctor immediately.