Working principle:
Adjust knurling wheels into the notch, draw the profile by rotating the knurling wheels, and make
teeth on the inner cavity of the profile.
Features:
1.Two knurling heads, each head is driven by each motor and powered on linear guiding for
horizontal adjustment by hands separately. Two heads not only can be adjusted vertically
altogether by electric, but also can be adjusted vertically separately by hands.
2.2 "Vulcollan" - surfaced guide rollers on linear guiding for horizontal and vertical adjustment
separately.
3."Vulcollan" - surfaced guide rollers on ball bearings.
4."Vulcollan" - surfaced side rollers.
5.Digital readouts for all adjustments.
6.Frequency converter to vary the feeding speed.
7.Optional clamps for direct strip insertion and sticking film device.
Technical data:
Power supply: 380v/50Hz
Total power: 1.28Kw
Wheel diameter: 120mm
Adjusting range for teeth maker: 110mm max horizontal distance
Feeding speed: 0-60m/min
Max processing size of profile: W*H=200mm*170mm
Distance between teeth makers: 6mm/110mm (min/max)
Overall dimension: L*W*H=1000mm*1200mm*1500mm
Net weight: 600Kg