HGM-1000 Ring roller mill
Equipment Overview
1. Device installed capacity of 142.5KW, power consumption per hour at 110 degrees, compared with similar equipment, tons of power is the lowest.
2. Production capacity of equipment: Product fineness D97 = 1250 mesh or more, up to 1.2 tons per hour, if the continuous operation of up to One million tons annual capacity. (The processing of calcium carbonate, for example)
3. Built-in classification system, the product between 600 mesh to 4000 mesh can be adjusted, D97 = 1250 with the purpose of the product, for example powder (mean particle size of 2.12um to thin) high, cut off point of fine products the advantages of high quality. (The processing of calcium carbonate, for example)

4. The materials are continuously fed into the feeder indoors crushed the host, the wheel's rolling, milling, impact of materials is fully crushed, crushed materials into fine-grading classification snapped, reaching fineness of the material through the classification round into the isolated product by the cyclone, a small amount of non-separating the powder collected by efficient dust collector into a product, purified by the clean gas dust from the high-pressure exhaust fan, complete system in a negative pressure the state to run production, no dust emissions.
5. Equipment is vacuum-type production system, small vibration, low noise, stable operation, there is no dust leaks, are environment-friendly equipment.
6. Power distribution cabinet installation of automatic control, to avoid the human factor, to ensure product quality stability and extend equipment life, reduce the operator to reduce production costs.