Description:

ST-D09 RFID reader

 

Specification

*Wiegand 26bits/ Wiegand34bits /ABA Standard Format Data Output

*Less than 0.2 second Response Speed

*Less than 0.5 seconds Proximity Time Distance:

*2-15cm Proximity Range

*Support UEM 4100 ID Card or compatible with it( 64bits, Manchester Code) or Mifare 1 Card (13.56 MHz Frequency)

*-25 to 75 Ambient Temperature,10%-90% Ambient Humidity

*Built-in Antenna

*Built-in LED (Two Color LED)

*Built-in Loud Speaker (Buzzer)

*DC 12V Working Voltage,70mA Working Current

*100 Meters Communication Distance

*Real Time Data Transfer

*Dark grey or White color

*PVC Case Material (Black Resin for Water-Proof Function)

*72*22.5*123.5MM

 

Installation

Using + type screw driver to loosen the screw between the panel and motherboard. And then embed the motherboard to the side wall with the plastic plug and screws.

 

Wire Connection

Red DC 5V-16V

 

Black GND

 

Blue D1

 

White D0

 

Brown BEEP

 

Green LED

 

Yellow Alarm

 

Notice

1. Confirm the electric voltage (DC12V) and differentiate positive anode and cathode of power supply

 

2. When external Power is used, make sure sharing the power with Controller Box or using the same GND

 

3. When the distance between card reader and controller is more than 50m, please use Power Line with at least 1.5 square cm Dia, or using several parallel Network wires