Platinum cure silicone rubber for food mold making Application:

Addition Cure Silicone Rubber for Concrete Crafts is mainly applied for making various molds:

Addition Cure Silicone Rubber for Concrete Crafts can be used to reproduce concrete or cement, gypsum, gypsum, architecture, decorative arts and crafts, big statue, cultural relic product, etc.

Addition Cure Silicone Rubber for Concrete Crafts can be used to reproduce poly resin, epoxy, polyurethane-polymer, plastic toy, gift and stationery.

Addition Cure Silicone Rubber for Concrete Crafts can also be used to reproduce soaps, candle & lighting.

 

Platinum cure silicone rubber for food mold making Datasheet:

 

Usage: Silicone rubber for PU/poly resin products, plaster, candles, gypsums crafts,  cement products, concrete/architectural products,  statuary, casting molds making, etc.

Model	Component	Colour	Mix Ratio    (%)	Viscosity before Mix(cps)	Viscosity after Mix(cps)	Hardness      (A0)	Pot Life	Curing Time	Tensile Strength (kgf/cm2)	Tear Strength (kN/m)	Elongation (%)
E642#	A	Translucent	1	20000	8200	42+/-2	30Min/25°C	2-3Hrs/25°C	80+/-20	10.4	350+/-50
	B	Translucent	1	3500				20Min/60°C

 

 

Do you meet the following problems when making silicone rubber molds?

1. Why the silicone mold just can be reproduced for a few times?

2. Why does the silicone mold appear to be dry outside but wet inside?

3. Why does the silicone mold get burnt out?

4. Why the silicone mold appear with weak tear strength?

5. Why is the silicone mold oily?

Platinum cure silicone rubber for food mold making Operation:

1. Step One to use E642#: Take 100g of part A and add 100g of part B and mix the silicon rubber and the curing agent evenly.
2. Step Two to use E642#: vacuum pumping
3. Without exception, this takes less than 10 minutes. Otherwise, it will cause cross linking reaction, and no more further steps will be available.
4. Step Three to use E642#: Brushing cast & Perfusion Molding operation.

 

Any more information, pls feel free to contact Ms.Christy

Mobile: 0086-18938867547                                                                   

Tel: 0086-755-89948006

Fax: 0086-755-89948030

Website: : www(dot) szrl(dot) net

Email:hyxj@szrl (dot)net