1. arising out of the industrial processing of floating oil and particulate removal needs.
2. pretreatment of waste water and precipitation tank best module device ( according to the demand environment design plan ).
When oil and water are transported by floating in a water tank and oil-water supply pump suction unit, KN-I Separator flows rapidly into three phases (oil, water and solids), small molecules condense into macromolecules to surface after oiling, impact by suspended particles T.P.M Module - Oil molecules condense Media Gallery, provide equipped with separate small oil droplet coalescence of high surface area as possible. Condensed set increasing oil rising to the surface, and by isolating the gravity discharge. Treated water (clean) flow to the drain slot to natural physical emission. Heavy inflow of solid particles suspended in the Groove and settle down, then grooved surface area increases with the separation angle, enabling rapid settlement of suspended particles, in fast-flowing water removal machinery or temporarily dispersed oil , separating time and procedure of a relatively short, highly efficient. Solid sludge sedimentation of impurities in the bottom of the tank should be cleaned regularly.