Specifications

Cone Rubber Fender for Jetty:
1. BV PIANC standard approved
2. No.1 best quality and service
3. Outstanding energy absorption

 

Features of Cone Rubber Fender for Jetty:

 

1. The latest design construction

Cone Fenders with the conical body shape and frontal mount steel frame are the latest generation product of “cell” type fenders, with optimal performance and efficiency. They provide an excellent energy capability with a low reaction (their designed compress deformation rise from 52.5% to 70% while the reaction force is unchanged.). The conical design and circular mounting base make them extremely stable fenders especially where angular performance is required.

2. Excellent energy capability

The normal compression of a Cone Fender is 70% and its maximum compression is 72%. They are available in sizes from 500mm high to 1800mm high.

3. High efficiency and outstanding performance

JIER Cone Fenders have excellent energy characteristics, with up to 72% compression for greater travel, and are highly effective even in severe angular berthing applications. This outstanding performance enables a cone fender to be used instead of a larger and more costly alternative. With their extreme stability and resistance to shear as well as their angular berthing performance, JIER Cone Fenders provide unrivalled flexibility and economy.

4. Applications

Cone Fenders are ideally suited to a wide range of berthing applications including oil and LNG facilities, offshore platforms, bulk terminals, general cargo, container berths, RoRo and cruise terminals.

How to calculate the surface pressure of Steel panel of Cone Rubber Fender for Jetty?

Formula: FB ≥ R/[(L-0.1) x (B-0.2)]

Where,

 

FB is surface pressure (KN/m²);

L is the contact length of steel panel (m);

B is the width of steel panel (m);

R is the maximum reaction force (kN).

The design of steel panel shall be according to quay structure type, berthing vessel, hydrologic condition and fender arrangement etc. Please contact us for the detailed design.

The arrangement of steel panel

1. a. Horizontal arrangement: fenders are arranged horizontally, e.g., 1 x 1, 2 x 1, 3 x 1 etc.;

1. b. Vertical arrangement: fenders are arranged vertically, e.g.,1 x 1, 1 x 2, 1 x 3 etc.;

1. c. Other arrangement for multiple fenders.

Specification of UHMW PE facing of Cone Rubber Fender for Jetty:

 

Model	Dimensions (L x W) (mm) (thickness is 30mm or 40mm)
Flat board	600 x 600	600 x 450	600 x 300	450 x 450	300 x 300
Corner board	600 x 200	450 x 220	380 x 220	300 x 220

Material of UHMW PE facing of Cone Rubber Fender for Jetty:

 

Both flat board and corner board are made of polyethylene resin, which has characteristics of high strength and good flexility. See physical performance below:

Material	Polyethylene resin (PE)
Specific gravity	0.95
Tensile strength (kg/cm2)	250
Elongation (%)	20
Compression strength (kg/cm2)	200
Bending strength (kg/cm2)	140-210
Young modulus (kg/cm2)	5600-10500
Resistance to shock (kg-cm)	70
Friction coefficient (toward iron)	0.2
Ratio of wearing	0.5

 

 

General Dimensions of Cone Rubber Fender for Jetty:

 

Type	specification
	H (mm)	D(mm)	U(mm)	P(mm)	S(mm)	hole
JCO500H	500	800	490	730	425	4
JCO600H	600	960	590	875	515	4
JCO800H	800	1280	785	1165	685	6
JCO1000H	1000	1600	980	1460	855	6
JCO1100H	1100	1760	1080	1605	940	8
JCO1200H	1200	1920	1175	1750	1025	8
JCO1300H	1300	2080	1275	1900	1100	8
JCO1400H	1400	2240	1370	2040	1195	8
JCO1600H	1600	2560	1570	2335	1365	8
JCO1800H	1800	2880	1765	2625	1540	10

 

REMARK: Different sizes of JCO Type rubber fender can be made according to customers' request.

 

Test and Installation cases:

 

 

 

BV PIANC Certification of QINGDAO JIER ENGINEERING RUBBER CO., LTD.