INTRODUCTION:
Derfoe silicone for vehicle is middle curing and favorable elasticity,The silicone can be set and become solid under the normal temperature.
Feature:
Derfoe vehicle silicone is middle curing. It has good flexibility and is suitable for exchanging position.The silicone is used widely at the Automotive industry and Repair Store. Especially for side glass of vehicle. floors in the bus lamp and a/c holders. Resists leaking damping and migrating caused by thermal cycling. Weatherpoof and uv-resistance Withstands both low and high temperature(250).
Main Purpose:
Seal the side windows of vehicles.the floor inside of bus,roof part and a/c holders,vehicle lamp and cable connection.
standard:
1、Before Condensation
Drop Length mm≤3    Touch Dry,min  <15
Deep Drying Speed 1-2mm/day
All the data are tested at 25℃ and 50% humidity condition.
2、After 7 days 25℃ and 50% humidity condition.
Shore hardness 35(black)  20(lucency)  tensile strength mpa ≥1.20
Max tensile 300%   Terminal Tensile 450%
Heat Resistance   -50～+250
Storage:
Should be stored at the dry condition. Keep the warehouse temperature from 2℃to 25℃. Last for 9 month.Better use it immediately after opening. for glass, aluminum plate, panel wall, steel configuration and slate.