There are mainly two kinds of cork pads.
1. Type: HS-A, with glue
Thickness: 1.5mm, 2mm, 3mm, 5mm
Specification:18mm length*18mm width (can be cut as any specification)
Uses: Use for the separation in transit, transportation and packaging for various thicknes glass, silver mirror, aluminum mirror, tempered  glass, building and auto glass. It can well peotect the glass from scratches, prints and moldy etc. Also cost saving, only 4-6 bits for each square meter easy to stick and tear off and no adhesive residue left.
Characteristics: First choice of separated material for the before and after tempering of glass.

2. Type: HS-B, Electrostatic adherence
Thickness: Wood Pad 1.5mm+ Folam Filling 1mm
                 Wood Pad 2mm+ Folam Filling 1mm
                 Wood Pad 3mm+ Folam Filling 1mm
                 Wood Pad 5mm+ Folam Filling 1mm
Specification: 18mm length*18mm width (can be cut as any specification)
Uses: Use for the separation in transit, transporation and packing for various flas\t glasses, sanitary glass, furniture glass and curved glass.
Characteristics: Replace the glue layer with self stick foam filling, only need to put lightly on the products, it will automatically stick and is not easy to fall off, and no glue left on the surface when using, it is very environmental and clean.