Deep Sea Generator Controller / Auto Module DSE5110

 

1. 37 items for its function

2. it can be woked on both of 24 V and 12V

3. LCD display

4. 810 PC interface

The module has the ability to monitor under speed, over speed, charge failure, emergency stop,low oil pressure, high engine temperature, fail to start, fail to stop and loss of the speed sensing signal.

The Model 5110 is an automatic engine control module. The module is used to automatically start and stop the engine, indicating the operational status and fault conditions by means of an LCD display and a flashing LED on the front panel.

Main features:

micro-computer control;

automatically activated, the shutdown;

real-time display unit operating status and parameters;

visualization of the police state of graphics and logo;

quick information display unit;

LED and LCD alarm instructions;

common custom settings, can be used for import and domestic models and other.

Control Features:

emergency parking control

automatic car plate

start delay control

local manually start / shutdown

remote automatic start / shutdown

start the motor from the automatic control

control of warm-up

warm Control

Cold Control

Parking / Idle Speed Control

Protection:

lubricants to protect lower

charger fail rechargeable

emergency generating units down

generating units of public alarm

generator over-voltage under-voltage over-current protection

high cooling water temperature protection

engine overspeed protection

failure of the engine shutdown

start the engine failure

=====================================================================

Deep Sea Generator Controllersare provided as follows :

1)DSE5110,Auto Start Control Module,with PC connector

2) DSE5120Auto Mains Failure Control Modulewith 3 more protections.

3) DSE5210Auto Start Control Module,with PC connector
4) DSE5220Auto Mains Failure Control Module,with PC connector

5) DSE701/DSE702Auto & Manual Start Control Module

6) DSE703Auto Start Control Module

7) DSE704Auto Mains Failure Control Module

9)DSE705Auto Start Module

10) DSE501KManual Start Control Module

11)DSE520Manual Start Control Module

Products list

PRODUCT LIST
Item	Part No.	Remarks
1)Deep Sea Controllers(Replacement)	DSE5110	Auto
	DSE5120	Auto/ AMF
	DSE5210	Auto
	DSE5220	Auto/ AMF
	DSE501K	Manual
	DSE701	Manual/ Auto
	DSE702	Manual/ Auto
	DSE703	Auto
	DSE704	Auto/ AMF
	DSE705	Auto/ ATS
	DSE710	Auto
	DSE720	Auto/ AMF
	DSE810	PC Interface Kit
	Generator Control Box	Installed with DSE5110
	Generator Control Box	Installed with DSE5120
	Generator Control Box	Installed with DSE5210
	Generator Control Box	Installed with DSE5220
2)ComAp Series Generator Controllers	MRS10	Manual/ Auto
	MRS11	Manual/ Auto
	Replace MRS16	Manual/ Auto/ Can Bus
	Replace AMF20	Auto/ ATS/ Can Bus
	Replace AMF25	Auto/ AMF/ Can Bus
	Replace IC-NT SPtM	Paralleling to Mains/ Can Bus
	IC-NT MINT	Paralleling Gensets/ Can Bus
3) Cummins Series
Cummins Speed Controller(EFC)	4914090	Only Supply CCEC
	4914091	Only Supply CCEC
	3044195	Installed in Cummins Engine Control Box
	3044196	Compatible with 3408324 Actuator
	3032733	Installed in Cummins Engine Control Box
	3037359	Compatible with 3408328 Actuator
	3062322	Compatible with 3408326 Actuator
	3062323	Installed in Cummins Engine Control Box
	3098693	Compatible with 3408326 Actuator
Cummins Actuator	3408324	Normally Closed; Low Flow
	3408326	Normally Closed; High Flow
	3408328	Normally Open; Low Flow
	3408329	Normally Open; High Flow
	3085218	Normally Closed; Low Flow
	3085219	Normally Closed; High Flow
	3085220	Normally Open; Low Flow
	3085221	Normally Open; High Flow
Actuator Wire	3063683
Magnetic Pickup(MPU)	3034572	5/8- 18 UNF- 2A/ M16*1.0
	213272	5/8- 18 UNF- 2A
	3237092	3/4 – 16UNF- 2A
	3834Z-010	M18*1.5
	3834Z-06A	M18*1.5
	3834N-010	M18*1.5
Oil Pressure Alarm Switch	3408607	OLD P/N: 3056344
Temperature Alarm Switch	3408627
Solenoid Valve	3018453
Engine Control Box	3419365
Marine Engine Control Box	3050164	For Marine Spare Generator
Mainboard	3053065	Used in Engine control box
Over Speed Protection Panel	3036453	Used in Engine control box
Lamp Board	3053060	Used in Engine control box
Trimming Potientiometer	3015105
Breaker	3034953
Annunciator Wire	3056356
4)GAC Series (Replacement)
GAC Actuator	ADC120-12/24	12V, 24V, 1.4 Nm
	ADC225-12/24	12V, 24V, 2.7 Nm
	ACD175A-12/24	12V, 24V, 27.5 N
GAC Speed Controller	ESD5111
	ESD5221
	ESD5500E
	ESD5520E
	ESD5522E
	ESD5525E
	ESD5330
	ESD5550E
	ESD5570E
GAC Synchronizer	SYC6714
GAC Load Sharing Module	LSM672N
EFC Interface Module	EIM100
	EIM108
Magnetic Pickup(MPU)	MSP675	5/8- 18 UNF- 2A
	MSP676	5/8- 18 UNF- 2A
	MSP677	5/8- 18 UNF- 2A
	MSP678	5/8- 18 UNF- 2A
	MSP6729	3/8- 24 UNF- 2A
	MSP6724	3/4-16 UNF- 2A
5) AVR
CATERPILLAR	VR6
	VR3
KATO	K65-12B
MECC ALTE	SR7-2G	Old Model: SR7-1
	UVR6
MARELLI	M40FA640A/A
	M16FA655A
MARTHON	SE350
	DVR2000E	Original
SIEMENS	6GA2 490-0A
	6GA2 491-1A
STAMFORD	SX440
	SX460
	AS440
	MX341
	MX321
LEROY SOMER	R230
	R250
	R438
	R448
	R449
	R450
Universal	AVR-8A
	AVR-12A
	AVR-15A
7) SENSORS:
DATCON oil pressure sensor	3015237	66-121 ℃, Alarm position: 103+-3℃
DATCON temperature sensor	3015238	0-125 PSI, Alarm position: 0.8+-0.3 Bar
VDO temperature sensor		40-120 ℃, Alarm position: 103+-3℃
VDO oil pressure sensor		0-10.3 Bar, Alarm position: 0.8+-0.3 Bar
8) GAUGES:
DATCON Oil Pressure Gauge	3015232	12V, 24V, 0-125 PSI
DATCON Oil Temp Gauge	3015233	12V, 24V, 60-160 ℃
DATCON Water Temp Gauge