Raw materials are fed into the straw crusher or cutter crusher to get raw material crushed. Get the crushed material carbonized in the environmental carbonization furnace, after 4-6 hours, users get the charcoal powder. The next step is charcoal forming with different charcoal forming machine: tablet machine, bar machine, charcoal molding machine and briquette machine.

1. The raw material can be all kinds of carbon-bearing biomass (eg: wood waste, straw, twigs, rich husk, nutshell, peanut shell, etc.), which shall be grinded into particles (diameter: within 3mm).

2. Put crushed biomass into carbonization furnace for anaerobic carbonization, and the organics, tar and moisture contained in the biomass are all carbonized during anaerobic firing process. After cooling, users can get charcoal powder.

3. Then transport charcoal powder into grinding wheel mixer for fully mixing and wetting.

4. Put the mixed charcoal into different charcoal forming machine to get charcoals of wanted shapes.

Web/ http://www.charcoalequipment.com   

E-mail/ tonglimachine5@cncharcoalmachine.com