We are professinal manufacturer and exporter of king pin bush, we can make all kinds of king pin bushing based on your size or OEM No.

Specifications

King pin bushes

1, high quality king pin bearing.

2, the surface of sintered bronze alloy Pb-Sn.

King pin bush has a combination of high strength, load-bearing capacity, and the advantages of good wear resistance. Particularly suited to medium-speed and low-speed high-contained set and so on.

Process through special method, at the friction surface can be processed into a variety of oil and oil hole and the hole in order to adapt to different working conditions lubrication use.

King pin bushings are widely used in automotive engine, chassis, motorcycle clutch, gear pump rub board and lifting equipment, king pin repair kits and other fields.

Material type of king pin bushing:

1. Cast bronze alloy
2. Bimetal
3. DX (POM based boundary lubricating bushing)
4. Wrapped bronze bushing

Specification of bimetal king pin bush

Alloy Hrdness

Characteristics and Application

CuSn6.5P0.1

Hb(60-90)

Lead Free

CuSn6Zn6Pb3

Hb(40-80)

Staring Motor

CuPb10Sn10

Hb(60-90)

The strongest material type, wide application scope.

CuPb24Sn1

Hb(45-70)

Link Arm

CuPb24Sn4

Hb(45-70)

Link Arm

Tech. Data:

Max. Load

Static: 250N/mm2

Dynamic: 140N/mm2

Max. Linear speed: 2m/s

PVPV limit: 2.8N/ mm2. M/s

Shear resistance strength: 350N/ mm2

Yield strength: 240N/ mm2

Temp. Limit: -40+250

Friction coeff.: 0.08~0.20

Thermal conductivity: 60W(m. K

Coeff. Of linear expansion: 14.10-6K-1

If you are interested in any of our king pin bush, please contact us freely