Instructions for installation and use

1. unscrew the adjustment screw, moving the movable bracket, in order to adapt to the size of the pot;

2. make the pressure rod put on the bracket on the machine leg, when the pawl does not mesh with the ratchet, and the handle makes the rack up to the highest point.

3. take out the bucket and put on the pressed food

4. buckets are packed and put back in place.

5. turn the handle so that the rack is reduced to the gap between the pressed food.

6. hold the handle, do not reverse the ratchet, shake the pressure bar up and down and press out the food.

The panel can be cleaned by 7. screwing and pressing the lock mother.

8. cleaning and cleaning the bucket, rack and leaking panel after use